There are numerous paneling styles for almost every decoration. Be it commercial or Dairy vinyl panels- these styles are a must-try. Often there is confusion in choosing the rustic broads, frame, and panel designs with or without molding and even the raised panels. You can cover an entire wall or choose the waist or shoulder high panels to cover a wall.
Details about the panels
Panels are made of fine hardwood. It is inexpensive pine woods that have fine finishing and glamour. The gamut runs perfectly on the finishing. These panels have a clear finishing that is either painted, or stained, or coated with some gorgeous decorative finishing.
The panels are of two forms: Board and Sheet.
The sheets are typically 4 by 8 feet.
The boards are ranging from 3/8 and 7/8 inch in thickness. It is common in ½ and ¾ inch. It often ranges from 3 to 10 inches which can be either square or tongue and groove and shiplap edges.
Before you start with the installation of the panels, the materials in the room will be installed for two or five days. These allow the woods to adjust the humidity level. It will help to further eliminate the shrinkage or expansion issues once the panel is secured.
Installing the wall panels
There are certain steps that you require to follow while installing the sheet panels.
Cut the sheet into ¼ inch shorter. The distance from the floor to the ceiling should be measured perfectly.
Apply the adhesives to frame the wavy patterns.
Try to drive the four finishing nails through the top edge of the panel which is around 6 inches from the wall. You can push the block behind the sheet.
When the adhesives are tacky, you can remove the blocks and press the wall panels firmly. It is like a mallet that can be hammered against a padded block.
Drive the top-edge nails all the way in and then nails the panel at the bottom. These will get a stud at the location.
Cover the nail head with attractive same colored molds.
You need to have the measuring tape, marking, and cutting scissors to measure the sketching on the piece of paper.
It is advised to start from one corner of the wall to complete it perfectly.
Why use vinyl wall panels?
If you have noticed the quality of the Vinyl wall panels then you mustn’t deny the fact that it is most attractive among all other materials. Especially the ones offered by Duramax require special attention. The best part of these panels is that they can hide the imperfect walls, and give it a super outlook.
To conclude, it is important to know how to fix or install Commercial wall panels in your commercial space. Yes, professionals are available for this work, but if you can do it then why take another outsider's help. Try out your luck with Duramax wall panels for the best experience.
No comments:
Post a Comment