The advantages of USA made PVC panels discussed

Wall paneling is a permanent solution to protect the walls and ceilings from moisture damage. Did you know that excess moisture can encourage mold growth, leading to a foul smell inside the commercial unit? Commercial spaces like dairy parlors, car wash garages, grow rooms, breweries, hospitals, labs, Marinas, and emergency shelters need good quality wall panels as protective coverings. If you are planning to buy PVC panels online, then check out the e-store at Duramax. The high-quality USA-made PVC panels are extraordinary for numerous reasons. Duramax wall panels are ideal for the reasons listed below.

Waterproof panels

The USA-made PVC panels are resistant to moisture and not vulnerable to water vapor. Such a quality makes the panels ideal for humid and wet places like grow rooms, Laundromats, dairy parlors, and so on. The panels made from 100% virgin vinyl repels moisture due to their non-porous surface. The panels do not absorb moisture, but shed off the water. The vinyl panels are extremely durable and can last for more than 45 years with minimal upkeep. Since these panels are resistant to most chemicals, you can clean them with strong cleaning agents or bleaches for optimal maintenance. The white and bright panels have a smooth surface that’s light-reflective as well. The waterproof panels have no wooden backers that can absorb moisture and are detrimental to the walls and ceilings. Duramax panels are often recommended for their 100% water resistance properties.

Hygienic panels

Buy PVC panels online to maintain optimal levels of cleanliness and hygiene inside the commercial space. The high-quality panels need to have ASTM and CFIA certifications. Duramax panels are certified and are FDA-compliant as well. The premium quality panels are anti-bacterial as they don’t allow dirt, filth, or debris to accumulate on the surface or around the corners. The vinyl panels are highly resistant to mildew, molds, and microbes. In addition, the panels help to maintain high standards of hygiene because of their stain-resistant qualities. Get the panels installed inside hospitals, nursing homes, and labs – where hygiene plays an important role.

Easy maintenance is an asset

If you are looking for panels that are easy to maintain and last the longest, then opt for vinyl panels. The high-quality panels don’t require deep professional cleaning. A single swipe with a damp mop is enough for the upkeep. In addition, these panels do not stain or allow dirt or debris to get attached to the surface.

Better than FRP panels

Vinyl panels are better than the traditional FRP wallboard. The panels don’t mold, absorb water, rot or delaminate, unlike the FRP wallboard. Again, the PVC panels require 50% less labor and 40% less cost for installation than FRP. The traditional FRP panels are susceptible to callbacks and need regular repairs for optimal maintenance. In short, you need to invest more in FRP panels in the long run. PVC is a one-time investment as it can last for 45 years or longer with minimal upkeep.

Wrapping up

If you are looking for PVC panels, then come to Duramax. The experts ship the panels directly from the factory within two weeks. Request a quote now.

The hype around the vinyl stain-resistant meat packaging wall panels

The meat processing units have a foul smell and have blood stains around the walls and ceilings. In addition, the ambiance is a big turn-off, especially if you don’t have waterproof wall panels made from vinyl. Duramax is a leading wall panel supplier in the USA to get you high-quality PVC wallboard made from 100% virgin vinyl. However, there are several reasons why you should choose Duramax meat packaging wall panels among all the other options in the market.

Panels that are easy to clean

The meat packaging wall panels need to be low maintenance. The workers cannot spend hours scrubbing off the stains, dirt, and debris. The FRP wallboard has a rough surface that makes cleaning difficult and staining more permanent. However, the PVC panels are stain-resistant and have a smooth surface that makes cleaning easier. PVC is chemical resistant, which means you can wash the vinyl panels with bleach or use strong detergents and cleaning agents to get rid of the stains. The white, pristine, and bright PVC panels retain their appearance for the longest time without fading or staining.

Vinyl panels are waterproof

The excess humidity inside the meat processing units dampens the walls and ceilings, creating a foul smell all around. Not to mention, the damp walls encourage mold and mildew to thrive. If you want to counteract the dampness of the walls and ceilings, then installing 100% virgin vinyl panels is essential. The panels are waterproof and non-porous. Unlike drywall and FRP, the vinyl panels don’t absorb moisture but shed off the excess water without swelling or degrading. In addition, the waterproof vinyl panels have no wooden backers, unlike FRP. The lack of wooden backers ensures that the panels are moisture-repellent and there are no chances of moisture seepage.

Easy to install

The lightweight panels manufactured from the reputed Duramax wall panel supplier ensure easy installation. The panels arrive at your commercial space in DIY kits and have a user-friendly installation guide. You can install the person manually with the help of only one man. However, you can hire more people to speed up the process. PVC installation takes minimal time, and the lifespan of these panels surpass others. In addition, the panels don’t require additional installation materials.

Durable panels

The PVC panels are recommended for their durability. The high-quality panels can serve you for 45 years or even longer. The panels have ½ inch thickness with an inner webbed truss design that ensures exceptional strength and durability. The high-quality panels don’t rot, rust, peel off or delaminate with time. The panels can go for years with no repairs or repainting.

Wrapping up

Duramax panels are FDA-compliant and have mold-resistant properties as well. Get the anti-bacterial panels to your meat unit within two weeks directly from the factory. The panels also have ASTM certification and meet the CFIA requirements. Therefore, order your custom-made panels from Duramax. The professionals undergo a stringent quality check before dispatching the panels to your location. Book a free consultation. Duramax offers a free sample to every potential customer. Request a quote now.

Install commercial kitchen wall panels to address moisture and hygiene issues

The commercial kitchen is most difficult to clean and maintain. The high-traffic area has a lot of smoke, oil spills, liquids, and vapor around the place. Maintaining the walls and ceilings of the commercial kitchen regularly is a tough task. Even the regular maintenance is never enough. The chefs are busy preparing delicious delicacies and have no time cleaning the walls. The stains, dirt, debris can create an unpleasant odor and threaten the hygiene of the place. An easy way out of these hygiene issues will be to install plastic wall panels for the commercial kitchen. Duramax is one of the leading manufacturers and suppliers of commercial kitchen wall panels. Here are a few things about wall paneling that will help you to make the right decision.

Arrest bacterial growth by installing wall panels

Periodic inspections inside the commercial kitchen can land you in troubled waters due to bacterial infestation. A great way to counteract bacteria and mold growth would be – wall paneling. The PVC commercial kitchen wall panels have a smooth surface with no crevices to stop bacteria from hiding around the corners. The dirt, debris, and filth cannot reside on the smooth surface and glides off easily. The vinyl panels are stain-resistant and don’t allow the oils or food particles to discolor the walls. The anti-bacterial panels help maintain the highest hygiene levels for being resistant to mildew, microbes, and mold growth. The panels are FDA-compliant, ASTM-certified, and meet the CFIA requirements.

Light-reflective and easy to clean

The PVC wall panels are lightweight and very easy to install. The panels are light-reflective and distribute the reflected lights at every corner of the room. The panels are white and bright, giving out a pristine new look at all times. The white panels don’t fade or stain, if you clean them properly. Made with 100% virgin vinyl, the panels are resistant to chemicals and unaffected by moisture. You can bleach the plastic wall panels for a commercial kitchen or wipe them with a damp mop and strong detergent to remove the dust and dirt particles.

Durable panels are a good investment

The PVC panels made from 100% virgin vinyl are a great investment for their enhanced durability. The Duramax panels have ½ inch thickness and the inner webbed truss design ensures exceptional strength and durability. The high-quality panels last for 45 years or longer with minimal upkeep. The panels are impact-resistant and don’t rot, mold, rust, or delaminate. FRP panels peel off after a few years and need reaping or replacing. However, such is not the case with Duramax panels. The premium quality PVC panels are resistant to fire and made from incombustible vinyl material, making them ideal for kitchens and food units.

Final Words

Duramax PVC panels will take only 7 to 8 hours to install inside the kitchen unit, whereas FRP panels take two whole days. Get the custom-made PVC panels within two weeks directly from the factory. Request a quote now. Avail your free sample. Duramax also offers a free consultation. Connect today!

Invest in vinyl restaurant wall panels to ensure a hygienic environment

Vinyl wall panels can easily give a different look to your restaurant. The pattern and texture of the restaurant wall panels make the dull space look bright and increase the aesthetics. Many vinyl wall panel suppliers can provide you with high-end wallboard to recreate a pleasant atmosphere. The white and bright PVC panels can instantly attract customers and make them feel at home for their suave and soft appeal. Duramax is one of the leading manufacturers in the USA for custom-made restaurant panels. Let’s check out how PVC panels can ensure a hygienic and pleasant environment inside your restaurant.

Light-reflective 

The restaurant needs to have a well-lit environment to attract customers. However, the energy consumption goes up, which can cause concern – if you are trying to cut costs. Instead, invest in light-reflective vinyl panels and distribute the lights evenly in all corners of the room. The smooth surface of the panels also gives a clean and sober look to the interiors. Family restaurants would prefer the light-reflective restaurant wall panels for their white and bright aesthetics. Light-reflective panels not only lower the energy bills, but are also easy to maintain in the long run.

Anti-bacterial and mold-resistant 

Duramax panels ensure a hygienic environment. The reputed vinyl wall panel suppliers ensure that the panels are resistant to mold, mildew, water and other microbes. The anti-bacterial panels have a smooth surface with no crevices to inhibit bacteria from hiding at the corners. The waterproof nature of the panels makes them resistant to mold and mildew growth. Dampness over 24 hours can result in mold development. With PVC panels, you can ensure a 100% damp-free environment where mold development gets restricted. Duramax panels are FDA-compliant, ASTM-certified, and meet the CFIA requirements.

Durable panels 

The Duramax panels are durable and made from 100% virgin vinyl. The panels last for 45 years or longer for their high degree of strength and resilience. The panels have an inner Truss design that makes them stronger and more durable than the ordinary wallboard. In addition, Duramax panels have one-hour fire-grade resistivity and are resistant to toxic chemicals as well.

Easy to maintain

Duramax panels are extremely easy to maintain because of their resistance to chemicals. You can bleach the panels or use strong detergent to clean them. The panels have a smooth surface making cleaning easier with a soft, damp cloth. However, vinyl panels don’t need regular cleaning. Just occasional maintenance is enough to ensure optimal hygiene. The stain-resistant PVC panels don’t rot, rust, or fall off. The panels are sturdy enough to serve their purpose without the need for repainting, repairs, or replacements.

Wrapping up 

If you are looking for custom-made vinyl panels for restaurants to maintain proper hygiene, then get in touch with Duramax. The professionals have over 40 years of expertise to deliver high-quality panels directly from the factory. The panels would reach within two weeks to your restaurant and the easy DIY installation is completely hassle-free. Get a free sample today. Request a quote. Duramax also offers a free consultation. Get in touch now.

Get PVC panels for protecting the cannabis grow room walls

Cannabis crops need an optimal temperature and environment to thrive and grow. The measured climatic conditions inside the grow rooms might lead to excess moisture and humidity in the air. Therefore, you need grow room wall panels that are not vulnerable to water vapor and are moisture resistant too. Your cannabis farming needs PVC panels to protect the grow room walls. Excess moisture is not only detrimental to cannabis grow room walls, but it can also damage the crops in the long run. Moisture leads to damp walls and mold growth within 24 hours. Duramax wall panel suppliers get you high-quality panels that are strong, durable and certified. Read on to know more about the advantages of installing vinyl panels inside the grow rooms.

Light-reflective wall panels 

The cannabis plantation needs an adequate amount of lighting for the crops to grow faster and healthier. Natural sunlight is limited in indoor farming, and that’s why LED lights need to get installed to compensate for the poor lighting. However, artificial lighting might not reach every corner of the cannabis plantation. Therefore, installing vinyl grow room wall panels is essential. The vinyl panels are light-reflective and distribute the reflected light everywhere. The light-reflective quality keeps the energy bills low and also aids in cannabis cultivation.

Easy installation 

PVC panels are fast and easy to install. The lightweight panels come in DIY kits with a user-friendly installation guide. The panels take a few hours to install as you don’t need additional materials or skilled labor for the task. One person is enough to install the PVC panels, but to double the speed, you can get two or more people. The panels have studs and hidden fasteners that offer a seamless fit. The vinyl panels have no external hardware that can weaken and damage the grow room walls. PVC panels are strong because of the tongue and groove interlocking system that holds the entire panel together in place.

Durable and waterproof 

Duramax PVC panels can last for 45 years or longer. The panels have an inner webbed Truss design that offers enhanced durability and strength. The vinyl panels made from 100% virgin vinyl are waterproof and chemical resistant. The panels are easy to maintain by cleaning with bleaches or heavy detergents. The chemical resistance of the panels ensures that they don’t rust or react with toxic substances. The smooth cannabis grow room wall panels have no crevices, making them easy to clean with a damp cloth. Cleaning the panels once in a while, is great to ensure their longevity and resilience.

Place your orders today

Are you looking for customized wall panels for your commercial indoor cannabis farming? Then, get in touch with Duramax for PVC panels that meet the FDA and CFIA requirements. The high-quality wall panels are ASTM-certified and also undergo a stringent quality check by Duramax experts before getting dispatched from the manufacturing factory. Order the panels today and receive them within two weeks. Duramax also offers a free sample to potential customers. Request a quote now. Get reverted within a day.