Replace your damaged wall panel with Duramax PVC wall panel because it is hassle-free, low cost and durable solution

Duramax is a leading PVC wall panel supplier that offers you the superior quality wall panel to get rid of the poor graded FRP (Fiber Reinforced Panels). Our panel reaches FDA requirements; hence you can use it in commercial kitchen walls to keep the area clean and free from humidity. The wall panels usually consist of FRP, PVC, and metal, among which PVC is the best solution in comparison to the FRP.

PVC is better than FRP because of several reasons. It has a longer life span. If you can provide it a little care, it will last for a lifetime. The 1-hour fire grade also ensures its durability. Unlike the FRP panel, it does not peel off. It does not need any adhesive. The installation is quicker and easier than that of FRP. It won’t absorb water, delaminate, vulnerable to water vapor. FRP panels are susceptible to callbacks. FRP cost is double, and the labor charge is 40% more in the case of FRP installation.

Since the FRP has a rough surface, cleaning is difficult. The thickness of PVC is 0.5,” and it does not require any backer, which causes the panel moist and thus dirty. PVC will never absorb moisture as in the case of FRP or get rot. This premium quality panel is manufactured in the USA. Therefore, FRP pricing is quite high despite poor performance.

On the contrary, a backer of OSB, drywall, or plywood is a must for the installation of FRP. The inclusion of backer along with the generous amount of glue and face-mounted rivets increases the overall price of material and installation charges. In addition to that, it is likely to rot and mold as the wood in the back has a tendency to absorb the environmental moisture. Due to the absorption of moisture, FRP peels off after a few years of installation, and you will need a replacement every 4-5 years, which incurs a hefty amount.  

With the advent of PVC, the era of moisture-absorbing backer supported panel is past now. If you compare FRP vs. PVC, you will realize the benefits of installing PVC. The PVC is also suitable for Cannabis to grow rooms because the material is light-reflective, water, and chemical resistant, and it distributes the reflected light evenly.

Besides food, our PVC panel is a better alternative to the highly-priced FRP for the animals, dairy, and agriculture too. The smooth surface is easy to clean, and it does not absorb moisture at all. The material is not favorable for the bacteria to grow on it.

If you want to replace your existing FRP wall panels, send us an email with your job requirement. Our experts will contact you for a detailed discussion and will get you a quote within 24 hours. We offer a free consultation, so feel free to contact us. For more details, visit our website and fill in the query form.

3 Key Reasons to Choose FDA Complaint Wall Panels from Duramax

Are you eager to strengthen the durability of your commercial establishment? If so you must have thought about installing wall panels. There are numerous wall panelling materials available in the market, but vinyl panels and FRP are most sought after.

Quite a few business owners are in favor of using FRP as the cost is a bit low as compared to PVC. In this particular blog, we would discuss briefly the need for installing the FDA complaint wall panels. Read it on and learn more.

1.      PVC Panels Are Capable Of Driving Out Molds And Moisture-

To save a few bucks individuals are quite in favor of FRP, but they land up with trouble as the long term advantage of FRP is very minimal as compared to PVC. Let us discuss in a nutshell how PVC has the edge over FRP.

To be honest, FRP is very much prone to moisture. The moisture that arises within the room generally cannot escape and remains hidden within the backer of FRP panels and eventually leads the panel to crack. Not only cracks in the panels but if proper measures are not taken with immediate effect the walls fall apart.

With PVC you can remain assured that there are no chances of moisture or mold getting accumulated as these panels are both mold and moisture resistant. The panels being manufactured by Duramax are not only durable but tends to remain in shape for at least a couple of decades and if not more than that.

2.      Vinyl Panels Are Quite Easy To Clean As Compared To FRP-

PVC panels are manufactured by applying high-quality vinyl. The vinyl is applied and makes the panels smoother ensuring easy cleaning. Though vinyl panels are not in requirement of regular cleaning, if you are eager to clean it once in a while just a simple mop is enough for you.

There are no chances of bacteria getting accumulated in the base of the panels. With FRP the chances of keeping it durable are very less, as FRP is prone to bacteria and the surface is quite hard as compared to PVC.

Cleaning is not that easy and thereby in requirement of a professional who can take up the onus of doing the cleaning. With us, you are assured that the panels that are being installed are sure to remain durable and you will not have to take up any major hassle of cleaning. Being a professional wall panel supplier in California, we have always lived up to the expectations of our clients.

 3.      The ease of installation-

PVC attaches directly to the studs and the tongue and groove get interlocked in an easy manner. With FRP the material cost increases as backers and adhesive are required to install the panels. Without hiring a couple of labours the installation cannot be carried out. But in case of PVC just single labor and go the job and no backers of adhesive are required for installing the panels.

3 Key Reasons Expressing Restaurant Wall Panels From Duramax Are the Best

For a restaurant owner, the first and foremost thing that is to be kept in mind is the maintenance of proper hygiene within the kitchen. Remember the floors of the kitchen remain loitered with oil and water which ultimately gives birth to moisture. There has been a long battle over PVC and FRP as few individuals are still confused about which wall panel is to be adopted.

We are always in favor of PVC for its long-drawn advantages. Our company manufactures durable PVC panels and we have catered our products to numerous restaurants in the city. In this particular write up we would emphasize on our restaurant wall panels and why you need to adopt PVC and no FRP. Read it on and learn more.

1.      PVC Panels Has The Tenacity To Arrest Moisture

We have already discussed right in the beginning that the floors in a commercial kitchen remain loitered with water and oils which in turn gives birth to moisture. Individuals who are still in favor of FRP will have to face the maximum jolt, as the long term advantages of FRP are quite less.

Moistures that arise in the room cannot escape and hide behind the backer of the panel eventually giving rise to mold causing detrimental hazards. Remember these molds tend to crack the panels and eventually the walls can fall apart. Why go for such hassle if the task can be done with ease? The best possible option that you have in hand is to adopt PVC panels from us and reap the advantages.

With PVC you are assured that there are no chances of mold and moisture as the panels is both mold and water-resistant. If you are thinking of long term advantage you can always go ahead for PVC and remain assured that the panels will last for at least a couple of decades and if not more than that.

2.      PVC Panels Are Quite Easy To Install-

If you are willing to purchase PVC panels you will have to pay a bit extra than that of FRP. Undoubtedly FRP is a bit low in cost, but the material cost and labor cost is quite high as compared to PVC. Without the usage of backers and adhesive, the installation cannot be carried out with ease.

More importantly, at least a couple of individuals are to be hired to carry out the task of installation. With PVC just a solitary person can do the task for you and secondly no extra material cost is to be incurred and the installation process is seamless and quite transparent.

3.      Our Panels Are Tried And Tested Before They Are Installed

All the commercial kitchen wall panels that are manufactured by us are ASTM tested and reach FDA requirements. You can trust us in a blindfolded manner regarding quality and professionalism. We will never disappoint you. Get in touch with us and witness the difference in positivity.

Avail the Best PVC Panels from Duramax and Witness the Positive Difference

For an owner of a commercial establishment like a diary room or commercial kitchen, all you need is to make it more durable. There has always been a PVC Vs FRP debate and always it has been established that PVC has the upper edge over FRP. Going by the long term advantages it is advisable to adopt PVC from Duramax.

Over the years it has been a prowess to have delivered top-notch services that have been liked by all. Business owners who are in favor of FRP need to think twice before going any further. We will examine in detail the advantages of PVC wall panels.

1.      The PVC wall panels are highly durable-

Going by the long term advantage that PVC offers are durability. We all spend good money to avail the best product. What is the use of availing a product which requires maintenance time and again? Pay a bit more right at the beginning and install PVC wall panels from Duramax. We ensure that your panels remain secured for a long period. Generally, our panels will last for almost three decades and you can reap the long term advantages.

2.      The panels are very easy to clean-

The panels are easy to clean as the surface is smooth enough. There are no chances of bacteria and mold getting accumulated in the base of the panel. Just a simple mop once in a while will do the task for you. In the case of FRP, the surface is hard enough and thereby requires a professional to do the job for you. Better to install PVC and reap the advantages in the long run.

3.      The PVC panels are very easy to install-

One of the major advantages that PVC has to offer is the ease of installation. Remember that the panels do not require backers as well as adhesives as it is required in case of FRP. At the same time, a solitary person can do the entire process of installation with ease in case of PVC. With FRP you require at least a couple of individuals to get it installed.

With PVC, you can rest assured that it directly attaches to the studs. In case the restaurant wall panels, the tongue and groove interlocks with each panel in a seamless manner. All you can do is get in touch with us and witness the difference of positivity.

4.      PVC panels will never peel-

The PVC panels never peel but with FRP, there are high chances of peeling which ultimately makes the panels fragile. If you are still not confident you can check out our portfolios and check out our websites. Right from there, you can get our contact number. If required you can have a direct talk with our representative and receive free quotes.

Come up to us so that we can create a positive bond of amity.

Install Vinyl Wall Panels from Duramax and Make Your Dairy Room Free From Moisture

For a dairy room owner, the first and foremost thing you need to carry out is making the walls panels durable. Frankly speaking, a diary room is moisture as milk; water and leftover animals remain loittered all over the floors. These liquids give birth to moisture which ultimately causes enormous hazards to the wall of the panels.

Now a question that arises is what type of detrimental hazards is being executed by the moisture? To be honest, in maximum dairy rooms’ owners are in favor of FRP rather than vinyl wall panels. The cost of FRP is less than PVC and this is one such factor that lures the maximum business owner to go ahead for FRP. But are you aware of the fact that FRP is not ideal for the long run?

Why are vinyl panels too adopted in case of FRP?

There are high chances that moisture that rises in the room gets hidden in the backer of the panel and mold tends to develop in the backers leading the panel to crack. In the long run, there are high chances that the walls might fall apart.

To make things seamless and make your rooms devoid of moisture, there is an alternative for you. Get in touch with us and let us know your requirements. Our organization Duramax is eager to help you out and make you avail the best PVC wall panels in town. Let us examine how our panels are about to help you out in the long run.

1.  We use high-quality vinyl-

The vinyl that is being used is of high quality which ensures that the surface remains smooth. A smooth and seamless surface ensures that the cleaning is done easily. Just a simple mop will do the task for you. In maximum cases, individuals do not even prefer mopping as very minimal maintenance is required. In the case of FRP, you need to unleash some extra bucks to get it cleaned.

The surface of FRP is quite hard and cleaning is not that easy. All you can do is get in touch and let us do the task for you. Right from the inception of our journey, we have never felt short of our commitments. We help you in every possible way so that you receive the best service in town.

2.  Our panels are mold resistant and water-resistant-

The panels that we manufacture are mold resistant and water-resistant. We ensure that the panels are devoid of mold and no such bacteria thrive in the surface of the panels. Our panels can withstand high-pressure situations and have the longevity of up-to three decades. Our panels are ASTM tested and reach FDA requirements.

3.  PVC panels are easy to install-

The panels that we make are quite easy to install and require no backer or adhesive as it is done in case of FRP. At the same time attaches directly to the studs without any hindrance.

If you have any questions regarding our service, you can get in touch with us for free quotes. We are here to help you as and when required.

If you are looking for a waterproof wall paneling choose PVC – Its time to discard FRP

Now that your FRP panels are peeling off and the walls are getting damaged, it is time to switch to a better solution. So, this time you can choose vinyl instead of FRP and once you install PVC it’s a lifetime solution. A vinyl panel can last up to twenty to thirty years without any maintenance. Duramax vinyl panels are ideal for commercial interiors that have a lot of moisture present like grow rooms, commercial kitchen, restaurants, fisheries, stables, restaurants, food processing, shower walls etc.

Well if you have FRP installed on the walls but the walls are getting affected by damp, its time to think that FRP panels absorb water through the backers, the moisture gets accumulated in between the panels and the walls which results in mold and bacterial formation. But on the other hand vinyl panels are 100% water-resistant because the PVC panels do not have backers and there is no question of moisture seeping inside. Duramax offers high quality Waterproof Vinyl Panels that are mold and bacteria resistant as well.

Now that safety is a very big concern, we ensure that our panels are ASTM certified and are FDA compliant. The plastic wall panels also have a 1- hour fire grade, this prevents any sudden fire outbreak. The vinyl panels are also chemical resistant and have the longest lifespan when compared to any other type of wall paneling.

Our panels are light-reflective, white and bright which makes sure that the panels distribute the reflected light. This is good for clients who are trying to lower their energy bills. This light-reflective nature makes our PVC panels beneficial for cannabis rooms because grow rooms need an adequate amount of light for growth.

Vinyl panels are very easy to clean, and do not need regular maintenance and rigorous cleaning. The surface of vinyl is very smooth which is very unlike FRP because the latter has a very rough surface which is not very easy to clean. Vinyl panels have a very smooth surface which does not allow bacteria to thrive on it.

It is very simple to install vinyl panels, it gets attached to the studs directly, there are tongues and grooves interlock with every panel. White installing vinyl panels, you do not need to invest in any materials and PVC takes the fastest installation time. Only one man is sufficient for vinyl panel installation and two men can speed up the process.

PVC panels do not need backers, adhesive, lamination, rivets etc for installation and you never have to hire more than one contractor. But FRP wall panels need investment on extra material and at least two trained experts for installation. Once PVC is installed, it’s a lifetime solution; it won’t absorb water, won't mold, won’t delaminate and show signs of degenerating.

Visit our website for a free sample, call us for more information. Now, get a free consultation on your project. Get a quote in one day.

How PVC wall panel from Duramax are versatile as compared to FRP wallboard: A detailed study

If you are still wondering how to make your car washing garage more durable, then this write-up is ideal to help you out and let you go ahead with the necessary changes in the room. To be honest a car washing garage remains loitered with oils along with water and grease.

This liquid gives rise to moisture which in turn hides at the back of the panel and later tends to form mold.  A question that arises is why such detrimental hazards are caused? It is mainly because business owners are in favor of FRP as FRP costs low. The only alternative that can be fruitful to make your walls durable is PVC wall panels. With our PVC wall panel, you can rest be assured that you will avail the best product in Ventura and Orange County.

In this particular write up we will emphasize on how PVC is more fruitful than FRP. Read on to learn more and hope you will get the motivation to install PVC in recent time.

1.      PVC is easy to install-

The PVC panels manufactured by Duramax are versatile and durable. At the same time, the panels we make are easy to install. Our panels do not require backers and adhesive as it is a must requirement in case of FRP panels. At the same time, you would be proud to notice that with the help of a solitary individual the installation process can be carried out.

PVC panels attach directly to the studs and the tongue and groove interlocks in a seamless manner. With FRP at least couples of individuals are to be called to make the task of installation transparent.

2.      The surface needs to smooth-

The surface of the panels needs to be smooth enough ad it is the same in case of PVC. With our PVC wall panels, you can rest be assured that the panels are easy to clean. The smooth nature of the panels drives out bacteria and mites. With FRP, you are not sure to avail these advantages.

The surface is quite hard and highly prone to mites and bacteria. Since we use high-quality vinyl for manufacturing our panels remains smooth. As the surface of FRP is not smooth enough it peels off after a few years.

3.      All our products are tried and tested before it is up for sale-

The products that we manufacture are all trial and tested. Our products are ASTM tested and reach FDA requirements. We ensure that the panels are durable than that of FRP wallboard. Our company has so far lived up to the expectation of all those commercial car washing garage owners who need quality services.

In conclusion, all we can say is, you can have trust and patience on us so that we can help you out and help you to avail the best product in town.