Why give up fiber reinforced panel for commercial kitchen and install PVC

Are you an owner of a commercial kitchen? If so you must have spent a lot on the decor. But have you given a thought in the kitchen? This place receives maximum traffic day in and day out. With maximum liquids seeping in and grease seeping in, there are high chances of moisture getting accumulated in the kitchen. Remember this moisture cannot escape and they tend to remain hidden in the backer of the panels. The moisture promotes mold to build up and finally causes detrimental hazards to the panels as it starts cracking.

The only alternative that you have in hand is to install PVC panels. These panels by Duramax are durable and can withstand high pressure situations. Remember our panels are made of high quality vinyl and the panels are water resistant and mold resistant. Chances of bacteria getting accumulated in the panels are minimal or none. The fiber reinforced panel is not very easy to install and as it requires a couple of individuals to get things done. Whereas for installing PVC panels all you need is just a solitary person.

The panels made by us ASTM tested and reached FDA requirements. For installing PVC you do not require a backer or any adhesive, but for FRP board all you need is both backer and adhesive. Our professionals are experienced and they have years of experience under their belly. They are eager to put their best foot forward as and when being required.

In the past we have received numerous awards and accolades that have made us one of the most sought after service providers in the location of San Diego and in Orange County. We request all our well wishers to have faith in us so that we can create a positive bond of amity and create more seamless transfers in the days to come.

Our company has proudly catered PVC waterproofing panels to numerous commercial kitchen owners and they have reaped huge benefits. The types of vinyl that we use for making the panels are exemplary and at the same time. For the best commercial kitchen wall covering, do not go too far. Just call us up and let us know your requirements. For free quotes and more information we are there to help you out.

Right from the embryonic stages, we have done things in a corrective manner and we have never failed. Hope we will be able to continue with the good services in the days to come. All we can say is have faith in us for the best and approachable service in town.

Duramax: The ultimate PVC panel manufacturer for your commercial kitchen

For a restaurant owner, the first and foremost thing that comes to mind is, how to create an inspiring decor, that will lure all and sundry. An owner spends quantum to make the decor get the Midas touch, but to the entire restaurant owner have you ever thought about your kitchen? You must be aware that your kitchen receives maximum traffic and lots of bacteria drive into the kitchen.

At the same time, the kitchen always remains loitered with water and other liquids. These liquids are susceptible to moisture and will not escape from this kitchen area. Eventually, they tend to cause detrimental hazards to the wall panels.

Moisture gets accumulated in the backer of the panel in due course promoting mold to get built up. Mostly maximum owners prefer FRP as FRP pricing is quite low. In the long run, FRP is not the ideal option that you are looking for. So what are the alternatives that you have in hand? Frankly speaking, the ideal option for you would be to install PVC wall panels. 

These panels have proven their worth time and again and one must thank the makers for retaining the durable aspects. Our company Duramax has been a proud manufacturer and installer right from our embryonic stages. We have catered our panels to numerous commercial kitchens and the results so far are nothing but exemplary. Now let us discuss the qualities that you can get from us. Firstly we would like to let you know that our panels are ASTM tested and reached FDA requirement.

At the same time, you will be happy to know that the installation cost is very low or none as it requires only a solitary person for getting installed. At the same time backers and adhesive are not at all required whereas you will require backers if you have decided to install FRP.

Let us now discuss the cleaning aspect of both PVC and FRP- Well. !! We all are busy these days and devoting enough time for our household task is time-consuming. But you have to devote a bit of time if you are installing FRP, as the panels are hard and might get the probe to bacteria in an easy manner.

PVC, on the other hand, is smooth enough and needs no special cleaning. We being a professional PVC panel manufacturer come across numerous business owners, who are in favor of giving up FRP and installing PVC. All it can be said is if you have made up your mind to install PVC get in touch with us. We are ready to help you out and make you get the best service in town. For free quotes and queries on PVC panels, you can always contact us. We are here to help you.  

Duramax: the key destination for Vinyl panels for diary room in Orange County

Are you the owner of a diary room? If so you must be aware that these rooms are very much prone to moisture. With more and more liquids like water and milk seeping in the walls and ceiling tends to accumulate moisture. The milk after being extracted remains loitered which in turn rises to become moisture-laden and gets accumulated in the backer of the panels.

With mold getting collect in the backers, there are high chances of panels getting cracked and finally making the walls fall apart. Generally, dairy room owners are more in favor of FRP panels, but these panels have proven its disadvantages time and again.

We have discussed one of the hazards that it might cause in the aforementioned detail. The ideal option available to you is installing vinyl panels. We at Duramax are proud makers of vinyl wall panels which are not only durable but ideal in the long run. Being Suppliers in the location of Orange County and San Diego we came across numerous business owners who are about to bar FRP.

To be honest, FRP is a bit less in price as compared to PVC but going by the long term advantages PVC is much more superior and proven it's worth time and gain. We have catered PVC panels to numerous dairy room owners and so far the results are nothing but exemplary.

We make use of high-quality vinyl so that the panels last long. Remember the panels are smooth enough and thereby cleaning becomes much easier. With FRP the surface is very hard and cleaning is indeed a task of difficulty. Either you will have to call up a professional or leave it exposed to get prone to bacteria. By now you must have got a fair bit of idea on why business owners are running after PV vinyl wall panels.

To let you with some more quality characteristic, we must tell you that vinyl panels are light reflective and it can distribute reflected light in an even manner. Though FRP costs low it is not quite easy to install and requires backers to make it firm and finally install it with ease. But with PVC no backers or adhesive are being required. You get 1-hour fire grade with PVC and all the panels that we make are ASTM tested and it reaches FDA requirement.

PVC has the tenacity to get attach to the stud with ease and more importantly the tongue and the groove gets seamlessly interlocked with each panel. If you are still having some doubts then you are requested to call us up and let us know your requirement. We are here to cater you free quotes and make you avail the best service in town. Get in touch and witness the difference in positivity. 

Duramax: The Exemplary Destination To Purchase PVC Restaurant Wall Panels

For a restaurant owner, an alluring decor and chic appeal hold a lot of value. It's not just about dropping in and having your delicacies. It is the ambience, which matters a lot. A soothing and minimalistic ambience will drive in the more and more gourmet loving populace.

Of course you need to spend money in creating inspiring decor, but have you given a thought on the place where the cuisines are prepared? The kitchen- maximum safety and security measures are applied to the kitchen. What is the use of serving well-garnished delicacies when one cannot take good care where the entire food preparing tasks are conducted?

Frankly speaking the interiors of the kitchen in a restaurant needs to be robust and up to the contemporary standards. It is quite obvious that the kitchen receives maximum traffic. With lots of individuals walking in now and then there are high probabilities that lots of bacteria and fungi drive into the kitchen.

The walls and the panels in the kitchen tend to become fragile with the passage of time and the chances of survival for the walls are very less. The best possible option that you can adopt is installing PVC restaurant wall panels. These panels are much more effective than other panels and have the tenacity to withstand the high-pressure situation.

Our company Duramax has lived up to the expectation of all and sundry by manufacturing durable PVC panels. We receive numerous restaurant owners every single day and we are proud that they have expressed their desire for PVC panels made by us.

Frankly speaking, the need of the hour is to sustain the moistures that arise from the liquids in a kitchen. With more and more water and other liquids required for cooking, there are high chances of moisture building. These moistures cannot escape and finally hide within the backer of the panels.

Restaurant owners were in favor of using FRP as the price was a bit low. But FRP is not ideal as moistures get accumulated in the backers and tend to develop mold. This mold will eventually cause detrimental hazards and the walls might fall apart.

With our PVC panels, you can rest assured that there won't be any maintenance charge and with a solitary person the installation can be done with ease. With PVC you have more advantages. It attaches directly to the studs and more specifically, the tongue along with the groove gets perfectly interlocked with each panel.

With FRP there are high chances of callbacks and the rough surface of FRP is quite difficult to clean. Get in touch with us and let us install a durable commercial kitchen wall panel and allow you to witness the difference of positivity.  If you need more information call us up or drop us a mail, we will surely respond to your query in quick time.

Duramax: The Decisive and Trustworthy PVC Panel Manufacturer in Ventura

PVC is a kind of plastic which is quite popular these days. Being budget-friendly it is quite easy to install and has an aesthetic appeal when it gets installed. These panels are ideal for a commercial establishment where moisture retention is very high. PVC panels are ideal for grow-rooms, diary rooms, commercial kitchens and so on. 

Duramax: The ultimate panel partner for your commercial establishment-

Duramax is a professional organization for PVC panel manufacturers operating in areas of Ventura along with San Diego and Orange County. Right from the embryonic stages of our business, we have had the prowess of living up to the expectation of every business owner. We strongly believe in our ability and our perseverance has allowed us to be one of the most sought after panel makers in these areas.  

How to create the best interiors-

• If you own a commercial establishment all you need is create an interior that would ideally befit the business. 

• If you have to redo the entire task, then it is indeed daunting and troublesome. 

• To go ahead with the best decision, you can always have trust and patience on us. 

• Our panels are designed to outlast and also outperform the FRP that were used in the yesteryears. 

• Bid goodbye to FRP panels put an end to issues like delimitation, water infiltration and tired looking walls.

• The aesthetic of the walls is about to change after you install fresh PVC panels made by Duramax.

Unique and versatile strength of our PVC panel-

The unique and versatile strength webbed designs are tailored to cater to exemplary service. The surfaces are highly robust and are resistant to scratch along with bacteria and chemicals. Mold and moisture are always detrimental for a commercial establishment, but with our PVC panels, there are minimal or no chances of moisture getting retained in the room. Since no OSB is required it has a natural robustness that is indeed noteworthy. 

No chances bacterial growth-

In our PVC panels for the wall, there won't be any bacterial growth and the appearance would be much more transparent. The panels are quite easy to install and being light in weight it is easy to transport. The professionals working with us do have years of experience and are ready to put the best foot forward for our clients. They are ready to accept stiff challenges and do the task for you within the stipulated time frame. 

The hidden fasteners in our panels make it easy to provide a smooth finish. Our products are available in 16″ width and standard 8′ along with 10′, 12′, 16′ and of course 20′ construction lengths. If you feel that your needs and preferences will be meted out, get in touch with us for more information or call us up @ 323-402-6776.

Why Install PVC Panels from Duramax Rather Than Opting For FRP

Are you an owner of a commercial establishment? If so you might have thought of making your interiors robust and long-lasting. In maximum facilities like cannabis grow room, commercial kitchens and diary room water do tend to seep in and make the wall fragile. Diary rooms are prone to maximum damage as moisture in these rooms cannot escape and gets retained in the walls making it detrimental for the future.

Make sure of installing PVC panels as they are much more durable. Few business owners have a liking for FRP as the pricing is quite less. Frankly speaking, if you are considering the initial costs, yes it might be a bit affordable than PVC. To ensure and avail advantages, in the long run, you can always have trust and patience on Duramax PVC. 

Why PVC is to be preferred over FRP-

·         There is no need for trimming between the panels, but this is very much needed in FRP.

·         More importantly, no backer boards are required while installing PVC, but you need to spend an extra $19 for FRP.

·         Backer boards are a prime necessity if you are thinking to install FRP.

·         No labour cost is incurred if you are thinking to install PVC panels.

·         An additional $16 needs to be spent for a couple of people as without professional help FRP can't get installed.

What we at Duramax can offer you-

We at Duramax have successfully catered the needs of numerous business owners in Ventura and they are quite happy with our service. Our panels reach FDA requirements and are ideal for the long run. The professional working with us does possess years of experience and they put the best foot forward for our clients. Get a sample today by calling us up @ 323-352-9279. We are ready to answer your queries.

The maintenance cost for PVC is minimal as compared to FRP-

Considering the long run PVC requires less or no maintenance. If required you can only make use of a cloth to drive out the little bit of grime and dirt that gets accumulated in the panel. FRP requires extensive cleaning as the moisture and water vapor tends to get stuck and thereby the wall becomes fragile and there are high chances that the wall might fall apart.

We have already mentioned that FRP costs less, but the long term benefit of PVC is much more. With 40% less material cost and 50% labors saving our PVC panels are ideal for your establishment. Why spend extra as the material cost with backer is almost double with FRP? Think about PVC and get it now from us today. 

PVC panels are tailored for a wet environment-

The interlocking system in PVC is quite easy to control whereas the gaps between FRP panels needs to be filled with trim. The debate between FRP and PVC is a long and we thought of making you understand the difference. The standard class A fire rating is noteworthy and something that might motivate business owners to install PVC panels. The smooth and seamless rivet free surface is ideal if the environment is wet. Get it today and witness the positives.

Undoubtedly FRP costs less, but the proven advantages of PVC are too accepted and adopted.  Get in touch with Duramax and allow you to install a PVC panel at your commercial establishment. You can easily witness the difference between positivity with ease.

Find Replacement For FRP Panels Right Here in Duramax

Grow rooms walls require protection from mold and bacteria regularly, and it is one of the most critical priorities of grow room owners. Hence it is essential to consider the importance of durable and long-lasting Grow room wall panels to keep the walls and ceilings of grow rooms safe. Because there are different walling materials available in the market, the choice for the proper equipment can become a bit tough for the grow room owners. 

While most people would recommend having FRP panels, they tend to have some issues such as delaminating, more maintenance requirements, shorter lifespan, and mold growth. These are the reasons why people tend to choose vinyl wall panels instead of FRP. 

Choosing vinyl panels for the grow rooms would be an excellent idea for the owners. These panels will be able to protect the walls from mold growth and bacteria issues. Also, the people working in these grow rooms will be safe from infectious diseases and health problems. 

Call us today for a free sample.

Here are some of the other reasons why choosing vinyl panels for Cannabis grow room walls over the FRP wallboard is a good idea. 

Easy Installation For Vinyl Panels 

The installation of panels can take a lot of time, especially if one is a beginner in the process. However, with vinyl panels, the process of installation is a lot easier. On the other hand, FRP panels are not that easy to install. Vinyl panels also have some other benefits against FRP panels when it comes to installation. For example, FRP panels require certain additional adhesives and backers for the installation process. Compared to that, vinyl panels are easier to install because they don’t need other backers and adhesives. If the grow room owners chose vinyl panels, the material costs will not be that high. Apart from that, vinyl panels require a single person to complete the job of installation, while FRP panels require two people to do the job. 

Easy Maintenance For Vinyl Panels 

One of the most critical problems that grow room owners have to face is the constant repair and maintenance of grow room wall panels. However, with vinyl panels, such issues don’t exist because they have pretty-low maintenance standards. Vinyl panels don’t delaminate after some time, and they are not susceptible to callbacks as well. So, one can reduce the maintenance charges if they select vinyl panels to grow rooms. FRP wall panels, on the other hand, are susceptible to callbacks and delaminate after some time. So, the maintenance requirements are increased as well. 

Light Reflective Benefits 

Grow room cannabis plants require light for proper growth. The high-quality vinyl panels will allow the natural extension of the plants because they are light reflective. So, these panels allow a particular portion of the light to enter into the grow room through reflection ensuring proper growth of Cannabis. 

These are some reasons why vinyl panels are a better solution for grow room owners than FRP panels. Easy to install and durable, vinyl panels tend to provide higher results than FRP.

Call now and get a free sample.

Why Garage Wall Panels From Duramax Are Ideal for Your Establishment

An owner of a car washing garage should have it in his mind to install durable wall panels that would be ideal to withstand the high-pressure situation. To be honest a garage gains maximum liquid along with grease and water throughout the day.

It is quite evident that moisture seeps in through the walls and causes hazards. There are high chances that the wall might fall due to excessive moisture retention. To make things seamless get in touch with Duramax and let us install the best garage wall panels for your establishment.

Our company has always lived up to the expectation of several who need the best panels that are ideal for your establishment. The professionals working with us do have years of experience and are ready to put across the best foot forward. Get in touch with us or give us a call @ 323-591-3042 for free quotes.

During our course of business endeavors, we have witnessed that individuals are more in favor of FRP as the price is quite low, but unfortunately, they give it up in the long run. To be frank enough FRP requires some extra charges during installation and it cannot withstand pressure situations. In this particular write up we would discuss briefly, how PVC has turned out to be the right choice for garage car wash owners.

1.      No backers (OSB, Drywall or plywood) are required-

If you are considering FRP then obviously the price you would be paying will be a bit less than that of PVC, but are you aware that you need to pay an additional $19? Yes!! You heard it right, during the installation you need to pay an extra charge as it requires backers for support.

The material cost automatically becomes double and you will end up paying an extra charge. In case of PVC, you do not need to pay anything more apart from the price of the panels. Not to forget the requirement of adhesive along with face-mounted rivets that are extensively used for FRP, but there is no such requirement if you have thought of using PVC. Get PVC panels from Duramax and witness the difference of positivity.

2.      PVC panels are thicker as compared to FRP-

The PVC panels are ½ inch thicker and there are no chances of it getting crack. The material cost is almost 40% and if not more and 50% labor saving. So which panel are you about to install PVC or FRP? Of course PVC, as it has much more proven advantages as compared to FRP.

3.      In the case of PVC, there are no chances of mold or rot-

Chances of moisture retention are less or none in case of PVC. These panels ideally absorb all the moisture with ease. FRP cannot absorb moisture and cause detrimental hazards to the wallboards. There are no chances of PVC getting prone to rot. The PVC garage wall panels ideally befit your establishment and can bring halcyon days.