FRP vs. PVC: Surely Choose Vinyl Between The Two Options

The choice between FRP vs. PVC panels is indeed tricky and yet a very crucial one. Such a case arises when one needs to consider the costs of the materials. When it comes to the factors and benefits, there is a lot of difference between PVC and FRP panels. 

 However, the cost of walling material is also high. The industry has so many different options when it comes to the elements which can be used for walling purposes. So, it is an undeniable fact that it can be a difficult choice for the people when it comes to the selection of walling materials. While most people would prefer FRP panels, going for vinyl wall paneling would be a better idea instead. 

When the cost of the walling materials is considered, vinyl panels tend to be a lot more beneficial for the different industries for sure. Well, here are some of the other reasons why the industries need to choose vinyl panels over FRP panels in the first place. 

Reasons For The Cost Saving Properties of Vinyl Panels

Most people are not aware of the fact, but there is not much difference in the costs of the panels if the materials are considered. However, there are some additional materials and the installation costs which tend to create the difference between these walling panels. Well, here are some valid points regarding the costs of vinyl panels and FRP panels. 

The industries that are looking for a reliable and affordable walling material for the walls, PVC panels are the right choice, and there are some reasons behind that. For starters, PVC panels have no requirement for additional adhesives and backers during the process of installation. Vinyl present in these panels is so thick that it can play the role of the backer itself. So, there is no need to have some extra backers in the case of vinyl panels. However, FRP panels do need to have adhesives as well as backers because these panels are rather thin and need some support. So, the extra materials required for the process of installation of FRP panels increase the cost. 

One of the main reasons why the cost of FRP panels is higher than PVC panels is the process of the installation itself. Vinyl panels are pretty easy to install. The tongues and grooves interlock very easily with each other making the process of installing vinyl panels very easy. A single person can do the job. However, when it comes to FRP panels, the installation process tends to take some time and also requires more workforce. So, the installation labor costs also get attached to the FRP cost. Hence, choosing to get these vinyl panels would be a great idea. 

Although the cost of vinyl, as well as FRP panels, tends to be on the similar side, there are some additional factors why FRP pricing tends to be a little bit more than vinyl. 

Call us anytime and get a free sample of vinyl panels.

Duramax: Forget Worrying About Reliability With FDA Compliant Wall Panels

Most industries tend to look for the perfect FDA compliant wall panels for the paneling of walls. It is especially more important when we are talking about diary rooms and parlors. These rooms are places where dairy products are kept safe. However, while they might be safe from the effects of the environment, it is the dangers inside that might harm. The walls and ceilings of the dairy rooms need adequate protection because edible products must be preserved carefully so that those are not affected by poisoning or dampness. 

Are you looking for an affordable and water-resistant solution for walling? Since the dairy parlors are the places where moisture content is high, there is a requirement to have insulated panels. 

Call us today and get your sample free.

Finding The Perfect Material For Walling 

The industry is filled with many options for walling. 

There are FRP panels, metal panels, and, most importantly, vinyl panels. Since the possibilities are too many, choosing the perfect one can be a bit difficult. Most people tend to think that FRP panels are suitable for dairy rooms. However, FRP panels aren’t as durable and also take more effort for installation. 

That is the reason why people move over to vinyl wall paneling in the first place. 

One of the primary qualities of the dairy vinyl panels is that they are pretty easy to install. Vinyl panels don’t require some adhesives or backers, and that is why the installation cost of the materials is meager. Compared to that, the cost of installation of FRP panels tends to be a bit higher because they require adhesives and backers as well. That increases the value. 

Also, the installation of vinyl panels doesn’t take much longer, and only one person alone can manage. However, FRP panels require at least two people to do the job. Not only does it take more effort, but the costs are increased too.  

Where the installation costs are minimal in vinyl panels, these panels are durable as well. Vinyl panels are not susceptible to callbacks, and they don’t delaminate after a long time. So, that decreases the costs of repairs as well. 

Along with that, the ease of cleaning the vinyl panels makes them a better option than FRP. One excellent quality of Trusscore vinyl panels is that they tend to have a pretty smooth surface, which makes it easier to clean them. However, FRP panels have rough surfaces which are difficult to clean, just another drawback of FRP.

Perhaps one of the main reasons why people choose vinyl panels for dairy rooms is because these panels are resistant to mold. The smooth surface of vinyl panels doesn’t allow the accumulation of bacteria and fungus, hence making the boards free from the mold and keeping people safe from infections. 

So, these are some things that you need to know about vinyl panels. Choose Duramax as your PVC panel suppliers as they have quality vinyl panels in store for you.

Call now and have a free sample. 

In this New Year Give Your Work-Station A Brand-New Look with PVC Panels

With the new year, a new decade has also started. So, why are you still managing and pushing yourself and colleagues to work inside rusty old office space or production facilities? The prices of PVC Panels are dropping significantly, which will allow you to use those panels to replace your old FRP boards comfortably. 

Many believe the Fiber Reinforced or FRP wall boards are a better and cheaper method of protecting your walls. But this is an incorrect fact. If you choose PVC Panels, it will cost you much less than the FRP Costs. The longevity of PVC wall panels is much higher than the average FRP panels. Now, if you are planning to re-decorate your office space or the manufacturing unit, you will get many advantages. In the following, some of the significant benefits of PVC panels are described in brief, which will surely help you make up your mind on choosing the right material.

Let me start with the areas and scopes where you can favorably install PVC panels for better results.

Grow Rooms

Dairy, Hog & Poultry Farms

Car Washes

Food Processing Plants

Large Restaurant Kitchens

Kennels for your pets

Meat Packaging Facilities

Laundromats

Marinas

Fisheries

Nursing Homes and medical installations

Public Restrooms

Health Care Facilities

Refrigerated Warehouses

Home Ceiling / Wall Panels

Riding Stables

Laboratories

Schools, College or Educational Installations 

Supermarkets or grocery stores

If you are using FRP panels for these installations, it's time to replace them with high-quality PVC or Polyvinyl Chloride Panels.

After the scope of use, let me inform you of some more advantages of the PVC wall panel to make up your mind in choosing the right one. 

Cost Estimation:

On average, for a 4’×8’ area covering the cost of the Duramax PVC Paneling can go up to $72, whereas the FRP wallboard cost can cost you more than $84. 

In the beginning, a 4’×8’ Duramax PVC Panel, it only costs $68 while an FRP cost only $38 at the commencement, but the associated cost of FRPs can rise more than $40. So mathematically Fiber Reinforced Plastic can sound good at first. Still, financially it is a terrible deal for you, your business installations as it will go more expensive over time than the Duramax PVC paneling.

Durability:

To increase the durability of the FRP wall or ceiling panels, you will need extra support such as adhesive and FRP wallboard to hold it in its proper areas. This installation will cost you more than the cost of PVC wall panels. Moreover, the FRP boards absorb moisture from the air and also rainwater until it becomes saturated over time. Later, the absorbed moisture can cause mold and fungus over the panels or can go rotten over time, which will force you to change the whole paneling after certain intervals.

The durability of Duramax PVC Panels is indisputable. Once you set the Duramax panels into your walls or ceiling, it will stay there forever. Duramax PVC Panels do not absorb moisture or water, so it doesn’t get affected by molds or fungus or any other biological or chemical intrusion.

Why is the Need of Waterproof Wall Paneling Instead of the FRP Board?

The choice between waterproof wall paneling panels and FRP panels is indeed tricky and yet a very crucial one. The problem arises when one needs to consider the costs of the materials. When it comes to the factors and benefits, there is a lot of difference between PVC and FRP panels.

However, the cost of walling material is also high. The industry has so many different options when it comes to the elements available for walling purposes. So, it is an undeniable fact that it can be a difficult choice for the people when it comes to the selection of walling materials. While most people would prefer the FRP board, going for vinyl wall paneling would be a better idea instead.

When the cost of the walling materials is in consideration, vinyl panels tend to be a lot more beneficial for the different industries for sure. Well, here are some of the other reasons why the industries need to choose vinyl panels over FRP panels in the first place. 

Get a free sample of vinyl panels by calling us. 

Why Do Vinyl Panels Cost Less?

Most people are not aware of the fact, but there is not much difference in the costs of the panels when it comes to the materials. However, there are some additional materials and the installation costs which tend to create the difference between these walling panels. Well, here are some valid points regarding the costs of vinyl panels and FRP panels. 

For the industries that are on the lookout for a reliable and affordable walling material for the walls, PVC panels are the right choice due to some reasons. For starters, PVC panels have no requirement for additional adhesives and backers during the process of installation. Vinyl present in these panels is so thick that it can play the role of the backer itself. So, there is no need to have some extra backers in the case of vinyl panels. However, FRP panels do need to have adhesives as well as backers because these panels are rather thin and need some support. So, the extra materials required for the process of installation of FRP panels increase the cost. 

One of the main reasons why the cost of FRP panels is higher than PVC panels is the process of the installation itself. Vinyl panels are pretty easy to install. The tongues and grooves interlock very easily with each other making the process of installing vinyl panels very easy. The job can be done by a single person itself. However, when it comes to FRP panels, the installation process tends to take some time and also requires more workforce. So, the installation labor costs also get attached to the FRP cost. Hence, choosing to get these vinyl panels would be a great idea. 

Although the cost of vinyl, as well as FRP panels, tends to be on the similar side, there are some additional factors why FRP pricing tends to be a little bit more than vinyl. 

Call us anytime and get a free sample of vinyl panels.

Your grow room walls only need vinyl panels and not any other walling solution

Grow rooms are filled with excess moisture, mainly because a lot of moisture is healthy for the growth of medicinal plants. Walling for grow rooms is a very important factor, excess moisture is bad for the walls and walling plays a big role in maintaining a healthy interior.  You did spend a lot of money on walling by installing FRP but it’s letting you down? Naturally, FRP is not the right kind of walling for your grow room walls.

The medicinal plants need extra moisture to grow but it can be poisoned if it’s affected by mold and mildew. There are even so many people working in the grow rooms, even if they would be affected by infectious disease. Choosing the right walling solution is of utmost importance. This is why you must choose Duramax Grow Room Vinyl Panels. Our vinyl panels are specially designed for your grow rooms, it’s entirely a waterproof solution and is extremely durable. Now the grow rooms plants also need excess light to have a healthy growth, this is why we have designed light reflective wall panels so that your grow room does not remain dark. 

Call us for a free sample 

What are the benefits of Duramax vinyl panels? Our vinyl panels are ideal for your grow room, once installed it’s a long term solution. Duramax vinyl panels are anti mold and anti bacterial. Mold is an enemy for the grow room plants, so here vinyl wall panels play a very important role in keeping its growth away. Our panels are extremely efficient in keep moisture away so there is no fear of bacterial growth inside the room. The panels have a very smooth surface; it does not allow any bacteria to sit on it. When it comes to durability, our panels are the ideal and vinyl panels do not need any sort of maintenance.

It’s a pretty wise decision if you choose vinyl panels for your grow rooms. It really does not matter if you have to spend more money one-time; it’s a solution for a lifetime. It’s the long run; vinyl would prove its affordability and FRP will obviously fail to impress inspite of the low cost. Duramax vinyl panels have their own specialty. Our vinyl panels are ½ inch thick, highly durable, have 1-hour fire grade, light reflective and definitely resistant to moisture. You can always visit our website for more information; you can read what clients have spoken about us and know more about our walling solution. When it comes to quality, you can be rest assured because at Duramax we have never learnt to compromise the quality. 

All our panels are FDA compliant, manufactured maintaining the FDA guidelines. You can visit our website for more information, read what our clients have to say by reading testimonials. Quality is our main concern; we are working everyday to enhance the quality of our panels. Incase you have installed panels in your grow room and you are not satisfied about it, we can offer you a replacement. Incase your car wash garage looks very dilapidated, its time to replace those old FRP with our vinyl panels. Our panels do not show signs of ageing so it would remain as good as new even if its years old.

 Call us at 323-831-3979 for paneling solutions. 

Choose Duramax for vinyl paneling solutions. Ask for a free sample today!