Duramax: Your One Stop Shop For Dairy Vinyl Panels

Finding the perfect walling material for paneling to the walls is essential. It is more critical when we are talking about diary rooms and parlors; these are places to store edible products. These rooms are places where dairy products are kept safe. However, while they might be safe from the effects of the environment, it is the dangers inside that might harm. The walls and ceilings of the dairy rooms need adequate protection because edible products must be preserved carefully so that those are not affected by poisoning or damp.

What Is The Right Material For Walling?

Are you looking for an affordable and water-resistant solution for walling? Since the dairy parlors are the places where moisture content is high, there is a requirement to have insulated panels.

When it comes to walling, there are plenty of options. There are FRP panels, metal panels, and most importantly the most useful vinyl panels. Since the choices are too many, choosing the perfect one can be overwhelming. Most people tend to think that FRP panels are suitable for dairy rooms. However, FRP panels aren’t as durable as vinyl and also take more effort for installation. That is the reason why people these days are moving over to vinyl wall paneling in the first place.

Easy to install vinyl panels

One of the primary qualities of the dairy vinyl panels is that they are pretty easy to install. Vinyl panels don’t require any adhesives or backers, and that is why the installation cost of the materials is meager. Compared to that, the cost of installation of FRP panels tends to be higher because they require generous amounts of adhesives and backers. That increases your cost as well but why do you have to spend more when you have vinyl.

Also, the installation of vinyl panels doesn’t take much longer, and only one person alone can manage. However, FRP panels require at least two people to do the job, therefore more workforce expense. This increases the effort and cost.

Less cost of installation

Where the installation costs are minimal in vinyl panels, these panels are durable as well. Vinyl panels are not susceptible to callbacks, and they don’t delaminate after a long time. Therefore the costs of repairs are eliminated.

Easy to clean

Along with that, the ease of cleaning the vinyl panels makes them a better option than FRP. One excellent quality of vinyl panels is that they tend to have a pretty smooth surface which makes it easier to clean. However, FRP panels have rough surfaces which are difficult to clean, just another drawback of FRP.

Less susceptible to mold

Perhaps one of the main reasons why people choose vinyl panels for dairy rooms is because these panels are resistant to mold. The smooth surface of vinyl panels doesn’t allow the accumulation of bacteria and mold, hence making the boards free from the mold and keeping all dairy items and consumers safe from infections.

Choose Duramax

So, these are helpful information that you need to know about installing dairy vinyl panels. Choose Duramax as your PVC panel suppliers as they have quality vinyl panels in store for you.

Get Proper Replacement For Your FRP Panels With Vinyl Panels From Duramax

Many commercial facilities are tired of their FRP panel walling and want to replace it with a nicer more appealing wall material. There could be many different reasons to replace FRP. Maybe the panels are peeling. Perhaps it just needs some replacement because FRP is hard to clean and there are persistent stains. Alternatively, the FRP board attracted mold and it has spread through the walls.

The complaints can be many, but there is just one solution for all of that. We are talking about the vinyl panels. When it comes to choosing between PVC and FRP panels, most people would recommend picking PVC panels because they are a lot easier to install, water resistant, and last longer. Call Duramax for free samples, free consultation or free quote at 323-831-3979!

Replacing Your FRP Panels With PVC

Some important reasons why you need to choose PVC wall panels as your replacement for FRP panels are the installation, maintenance, and cleaning.

·         Vinyl Panels Can Be Installed Easily

When it comes to vinyl panels, they require just one person to do the job. FRP panels are a little challenging to install because they need more materials such as backers and adhesives So, you might have to use two people for the installation and pay for the extra material. Such issues don’t apply to vinyl panels. These panels are thicker and eliminate the need for backers. Plus, there are tongues and grooves in vinyl panels that interlock each panel side by side to speed up installation. So, you don’t have to worry about trim between every panel, adhesive, fasteners, or rivets. That means huge savings on labor!

·         No Peeling Off After Some Time

If you have FRP panels in your walls, then you would probably notice that they start to peel off after some time of use. This is an unavoidable and expensive part of FRP panels. Due to the addition of adhesives to keep them attached to the walls, FRP panels might peel off when the adhesives lose their effect. Well, this is something that you don’t have to worry about in case of vinyl panels. They are always attached to the studs and don’t peel off with time. FRP panels are more susceptible to callbacks which is an issue you don’t have to worry about when you have vinyl panels.

·         No Mold Or Bacteria Problems

One of the main things about vinyl panels is that they are completely resistant to moisture. So, you will not have to worry about mold growth. FRP panels, on the other hand, might have mold growth on them after some time. This is because FRP panels are spaced apart, leaving a gap for water vapor to penetrate. Also, the smooth surface of vinyl panels and zero crevices mean that bacteria will not be able to form in these panels. The flat surface of PVC panels also makes it very easy to clean.

So, when it comes to the replacement of FRP panels, choose the vinyl panels to solve all your problems. Vinyl panels reach FDA requirements for durability and have a 1-hour fire grade as well. You can easily buy a PVC panel from Duramax, check out our website or call 323-831-3979!

Reasons To Choose PVC Grow Room Panels

Choosing the perfect walling material for grow rooms is a tough task. After all, there are so many different types of materials that are available for walling that one might get a little bit confused.

For a very long time, grow room owners have relied on mylar for their grow room wall covering. However, specific problems can be associated with Mylar. They require much more maintenance due to tears. Cleaning will be difficult without tearing the material. There are some other issues with creases and light reflection hotspots as well.

So, as a solution to that, panels for PVC Grow room are the new innovation. Given below are some of the reasons why grow rooms should choose vinyl panels.

If you want to have a free sample, call 323-831-3979!

Vinyl Panels Are Easy To Install
When it comes to the installation, the only complaint about mylar is that air bubbles or creases may occur and the sheets are very thin. Also using adhesives would mean that there is more material cost. Such an issue doesn’t exist with vinyl panels. They are thick and smooth so there are no mistakes with installation. Plus, you will save a lot of installation costs as the job of installing vinyl panels is fast and efficient.

Waterproof And Durable
One of the things about our vinyl panels is that they are durable. The panels are ½ inch thick and  are pretty much water-proof. This means that cleaning is easy and can be used with a high powered hose. Mylar is thin and can possibly tear so it requires careful cleaning. This can take a lot of time each and every day.

Since vinyl panels are all waterproof, they are entirely free of any mold. This is because vinyl panels interlock with each other, creating a seamless surface so they don’t allow water to trap in between. So, there is no degradation, and the walls have a long-lasting life.

Light Reflective
Another one of the reasons why people use vinyl for grow room wall panels is because they are light reflective and they make sure that the plants have optimal growth. If you install vinyl panels, then the perfect amount of sunlight can enter the grow room which is a good thing for the plants.

So, these are some of the reasons why the grow rooms should have vinyl panels. If you agree with what we have to say, then call Duramax to get vinyl panels right now at 323-831-3979!